Mold Testing and Mold Inspection Services Tulsa, Ok
Mold Testing is the collection of 3 air and or surface samples of your property. During the Mold Test, our Certified Mold Inspector will check the areas of concern, humidity levels and water intrusion issues. Afterwards, we overnight the samples to an independant lab to analyze and report their findings. By comparing the outdoor air sample to one or more indoor samples we can determine if elevated mold spore levels are present. Mold spores are everywhere, it is not uncommon to find low levels of mold inside your property. If normal mold levels are detected, no further mold remediation is necessary. But if elevated levels of mold spores are detected, you may have a mold problem. Since we completed the Mold Inspection, we know the cause of the mold growth and its elevated mold spore levels. With our Mold Inspection and Lab Mold Analysis Report, we can accurate Mold Remediation recommendations.
- There is an extra charge for additional samples, if needed.
At times, when other mold remediation contractors complete their work, we can provide a 3rd party clearance / post mold test to ensure indoor air quality has been restored to normal conditions.
Why is Mold Testing an Important Part of the Mold Inspection Process?
Mold testing should be done only to make a particular determination, such as airborne spore concentration or identifying a particular species. MOLD911's Certified Mold Inspectors follows the recommendations of the Occupational Safety and Health Administration (OSHA), National Institute for Occupational Safety and Health (NIOSH), the EPA and the American Industrial Hygiene Association (AIHA) guidelines.
Mold Testing - Sample Lab Analysis Report
Lab report are important documents that you can use to present homeowners, renters, landlords, tenants, realtors, potential homebuyers and employees with to assure them, that the environment they are in has normal air quality conditions.
Mold Testing - Sampling Methods
Air sampling -
Air Sampling is our most common form of air testing to assess airborne mold spore levels of indoor and outdoor air quality. Air sampling identifies mold species and airborne concentration levels.
Surface / Swab sampling -
We swab or tape life the area being sampled, often a measured area, and subsequently sent to the mold testing laboratory. Final results will indicate mold species.
Bulk sampling -
Removal of material from the contaminated area to identify and quantify the mold in the sample
Did You know?
Multiple types of Mold sampling are recommended by the AIHA, since each has limitations; for example, air sampling for mold in the will not identify a hidden mold source and a mold tape sample cannot determine the level of contamination in the air. Once our independent Accredited Third Party Lab analyzes the mold samples the final results will indicate mold levels and and mold species.